With the ignition off push the 00/set button located in the center of your instrument cluster. That it is the full procedure how to reset oil service light toyota tacoma second generation.
Reset tire pressure warning light toyota tacoma 2 generation.
How to reset maintenance light on toyota tacoma 2014. Select total mileage on you odometer with the trip odo button. Put the key to the on position but don’t start the car. Press and hold odo/trip button and turn ignition to the “run” position.
It has no way of knowing whether your oil has or hasn’t been changed in the interim, and it never, ever is an indication of something. Press and hold the trip meter reset nob (next to your toyota tacoma's odometer). I only need to service it over 10,000 miles as per toyota, so i have to reset this light every 5,000 miles on my own without going into the dealership.
Toyota tacoma reset maint reqd light indicator. The maintenance required light should not appear on your dashboard anymore. 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
Then, turn your vehicle off and press and hold the trip meter reset button. This reset should be done after changed the engine oil and filter according to the technical specifications relating toyota tacoma engine. Turn the ignition to run (one position before starting engine).
If your vehicle has an ignition button, press the start/stop button two times without step on the brake pedal. Turn the ignition to run (one position before starting engine). Push and hold the trip reset or mode button.
First, turn your vehicle on and make sure the odometer is displaying miles and not a trip meter. If you like to reset any maintenance oil light after an oil change. These intervals happen at mileage or time intervals (typically every 5000 miles/6 months).
How to reset maintenance light toyota. How to reset maintenance light on a 2010 toyota tacoma. There are 2 methods to reset the maintenance reminder on your toyota tacoma.
Turn your ignition key to the 'acc' or 'lock' position. To reset the 2005 toyota tacoma maintenance light, please follow these instructions: How to reset maint reqd light on toyota corolla.
I just finished the oil change, and then now i’m back in the car, and we’re going to do the maintenance reminder reset. This is easy to reset the maintenance light using. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for toyota cars.
Please follow the instructions below according to your vehicle trim level. The maintenance required light is standard in all newer toyota vehicles, and helps insure long life and dependability by making sure factory. This light comes on to remind you to change your oil.
While holding the trip meter reset nob, turn the ignition to 'on', but do not start your toyota tacoma. For toyota tacoma years 2006, 2007,2008 models the oil reset maintenance light system can also be reset as follows: You take the service of a toyota dealership for the oil change, they will reset maintenance light toyota for yourself.
Press the odo/trip button to display to odo. The toyota tacoma’s maint reqd light indicates a service interval has been met. Since you have manually reset the maintenance required light, its counter is back to zero.
Turn the ignition key off push the trip reset button and hold wile turning ignition on. Hold the meter reset until the maint reqd light switches off. With vehicle ignition switched to on position, make sure odometer is showing “tripmeter a”, then turn the ignition switch to off position.
Or any warning light for service reminder which appears on the display. After an oil change, you should reset your maintenance required light on your toyota tacoma. September 13, 2019 by jason.
Toyota recommends not to ignore the light and doing a series of inspections to prevent damages to the engine. While still pressing the button, turn your keys clockwise. Then turn the ignition to off.
This vehicle has a maintenance required light that goes on every 5,000 miles. This light comes on strictly as a function of those miles; We have a 2008 tacoma here, so let me show you how that is done.
Continue to hold down the trip odometer reset button until “000000” miles appears on the display and the maintenance light turns off. Resetting the toyota maintenance required light is fairly easy. Ensure odometer reading is shown.
It comes on 5,000 miles after the last time it was reset. While holding reset button, switch ignition to on position. If the light still appears, repeat the procedure again until the maintenance light goes away from your dashboard.
Continue to hold down the trip odometer reset button until “000000” miles appears on the display and the maintenance light turns off. Need to reset the maintenance required light after oil change on my 2014 toyota prius. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
How to reset the toyota maintenance required light. Continue to hold down the trip odometer reset button until “000000” miles appears on the display and the maintenance light turns off.