To drain your hot tub with a hose, follow the following steps: Keep it low on the ground, making sure it’s lower than the tab, and allow gravity to work its.
If the drain or sewer is situated farther away, attach a garden hose to the spigot, position the other end of the hose over the drain, and open the valve.
How to drain a hot tub with a hose. First of all, you must attach one end of the hose to a water bib (faucet). The quickest way to drain a hot tub is with a submersible sump pump. Find a safe spot to position the hose to drain such as your driveway to flow into the street.
If left on your lawn, it will become flooded. A submersible pump can be used to quickly and easily drain your hot tub. The idea here is to fill the hose with water completely, with minimal air bubbles in the line.
If left on your lawn, it will become flooded. There are a couple of ways you can drain a hot tub. Attach the hose, open the spigot and let the water drain.
Turn the pump on and let the spa drain. Put the open end into the hot tub, and start filling the hot tub. Now it’s time to drain the water out of the hot tub.
Crimp the hose if the faucet is higher than the hot tub and take the end of the hose to the lowest place in your yard, allowing the water to pour by gravity from the hose. A lot of water will be draining from your tub so stretch the hose to a part of the yard where the water drainage won’t matter or where it won't flood. Once you've got flow into the tub, turn off the water at the hose bibb.
With one, you can drain up to 2,000 gallons of water per hour. Drop the hose into the tab, make sure it lands in the bottom, and then turn it on. How to drain a hot tub with a hose.
Some hot tub manufacturers will have a water hose connection inside the cabinet. Step 3 go back to the hot tub and make sure the hose stays at the bottom of the tub as the water level drops. Connect the hose to the water bib (that's the faucet on the side of your house).
Place the end of a garden hose in the hot tub, dropping it straight down into the water so that it lies on the bottom. It is essential that only water must be coming out by the time you finish. Attach a garden hose to the sump pump.
Keep it on until there is no more air escaping into the tab. Run the hose’s open end to the draining place. The first option is to simply open this.
Doing this creates a siphon that will pull the water out of the hot tub and through the hose. Almost all hot tub, and especially the hot tubs that we sell have a built in drainage valve. If your hot tub has an attached hose this can be used to drain the tub from the bottom.
Next, you must let the water run through the hose into the hot tub until there is no air inside the hose and only water is coming out. Turn off the hose, disconnect it from the faucet, and keep it low to the ground. Different ways to drain a hot tub.
Draining your hot tub using a garden hose, remove the front panel on your hot tub to find the hose spigot. The fastest way to drain a hot tub is to use a submersible pump. You can often find the controls in the cabinet.
When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage. Personally, i like using the aquapro apc3000 submersible pump.this 1/3 hp pump can be used with a ¾” garden hose or a 1¾“ sump pump discharge hose to remove up to 30 gallons per minute (1,800 gallons per hour). When the hot tub is empty, turn the sump pump off and detach the hose.
Attach the hose, open the spigot and let the water drain. These are usually on the same side as all the controls. Draining your hot tub using a garden hose, remove the front panel on your hot tub to find the hose spigot.
The other end of the hose must be kept inside the hot tub. Place the pump at the deepest point of your hot tub. You’ll need to twist the hose onto the spigot so make sure it’s on firmly.
Note that if your drain or sewer is positioned uphill of your hot tub, you’ll need a submersible pump to drain the tub completely. This will be able to drain out the water. Attach a garden hose to the hot tub’s bottom drain spout.
Turn it off and plug out from the faucet. Once the water is drained, you can easily inspect and wash the shell’s interior, and remove and clean your spa filters before refilling it. To drain the water with a sump pump, follow the steps:
You can drain these types of tubs by attaching a regular garden hose. Simply, drop the pump into the tub, flick on its switch and wait as the water flows out. The drain in the hot tub drains away from the water when you empty it.
This will allow you to hook a standard water hose to it and allow the drainage to go somewhere safe and. Don’t forget to turn off your tub first so that the pumps aren’t active when you’re draining the water. Find a safe spot to position the hose to drain such as your driveway to flow into the street.
Turn the sump pump on and start draining.