There are 12,000 btus per ton of cooling, and air conditioners are sized by every ½ ton. (1) locate the model number your researching.
This number indicates the btus/ hour of the unit.
How to check ac tonnage from model number. This is the only contact number to speak to our customer service representative. 18, 24, 30, 36, 42, 48, 60. Tonnage, air flow, kw, etc.
This number will equal the tonnage of the ac unit. Divide the number by 12 (which represents 12,000 btu/hr, or one ton of cooling capacity) to get your ac unit's tonnage. Are located within the oval/round shaped buttons).
Your starting current will approach locked rotor amps for a very brief time, depending on the starter, but even knowing the running current will not give. The ac tons will be labelled on the unit itself. Divide your locked rotor amps by about seven will give an approximation of the current draw.
If you don’t want to do the math, here are the numbers you’re looking for and their corresponding tonnage: The possibilities on residential units range from 18 to 60. The normal rule of thumb is to use the division of 12 to get the size (tonnage) of the ac take the model number 24acb360a003 as an example.
How to check ac tonnage from model number. The good news is that most hvac manufacturers make it easy to determine the nominal capacity of your air conditioner. We can’t all be hvac experts.
There isn’t a universal model number decoder since ac manufacturers uses different codes, but the model number can tell you the capacity, tonnage, single/variable speed, voltage, refrigerant type, and brand name of your air conditioner. The easiest way to look trane tonnage model number is on the ac unit itself. The tonnage, or capacity of the system is coded in the model number.
(2) hover over each grouping to reveal pertinent info for each part of the model number. This number is located on a plate attached to the back of the unit, near the power supply and coolant lines. 18, 24, 30, 36, 42, 48, or 60.
Hereof, how do i tell the tonnage of my ac unit? Divide the number by 12 (which represents 12,000 btu/hr, or one ton of cooling capacity) to get your ac unit’s tonnage. One of the questions that many folks asked on yesterday's post, was how does one know the tonnage of their air conditioning system.
The easiest way to look trane tonnage model number is on the ac unit itself. This will give the tonnage. @ 9210188999 call our customer support:
The model number will indicate the tonnage of the air conditioning or heat pump system. Somewhere within the model number, look for the following numbers: The label will state the manufacturer, model number and serial number.
The model number usually indicates the heating or cooling capacity, but on newer systems the cooling capacity can also be stated separately. The possibilities on residential units range from 18 to 60. Tonnage, air flow, kw, etc.
Take this number and divide by 12. The model number is where you can find the size of ac you’re looking for. Once we know what type of air conditioner you have, our expertly trained team of technicians will be able.
Divide the btus by 12,000 (one ton). Low side item month b 1972 b 1993 t=purchased low side item a jan. Generally, whenever you are planning to buy an air conditioner, the most important factor is its tonnage.
For example, 024 equals 24,000 btus. On the system's model number there will be a number: 1.5, 2, 2.5, 3, 3.5, 4, 5.
In stores or online they are generally categorised the ac based on the tonnage. This will give the tonnage. For mitsubishi, you should look near the end of the model number.
Go to the condensing unit on the outside and look for the data plate stamped on the actual side of the compressor. Ac tonnage is used to rate an air conditioning unit. Simply divide the btus by 12,000 to calculate the tonnage of your unit.
Determine the nominal size from the model number. Some manufacturers bury tonnage or btu information in their model numbers. The size (tonnage) is never listed on the unit but the model number will usually tell what size is in place now.
It’s in the model number. 18 = 1.5 tons 24 = 2.0 tons 30 = 2.5 tons 36 = 3.0 tons 42 = 3.5 tons Tonnage is a unit of measure that is used to describe the cooling or heating capacity of a system.
The easiest place to find ac tonnage is on the ac unit itself. Up near the top of the label, you’ll see the model number (m/n) and serial number (s/n). Go outside to the condensing unit and look for a data plate mounted to the side.
Go outside and find the outdoor unit, that metal noisemaker hidden away on the side or the back of the house.